Filter
Top Products
DYMO
®
6000 Labelmaker10
Description of keys
The keyboard
The keyboard is divided into two distinct areas:
1. The function keys —
ON/OFF
Switches the power on and off. The Labelmaker will switch off
automatically if no keys are pressed after one minute.
The following keys have a dual function. The main function, as
printed on the key top, is performed by simply pressing the key.
For the secondary function, as printed above the key, press and
hold down
followed by the key required.
SIZE
Changes the character height. The height is normally adjusted
automatically as you key in the characters (see ‘Auto-scaling’). To
change the height manually, press this key repeatedly to step
through the character sizes available, as shown on the display.
+
SIZE
PREVIEW
Shows a view of the whole label on the display.
STYLE
A menu appears from which you can select normal (A), bold (A), or
outline outline (AA) character styles, as indicated down the right hand side
of the display. The whole label will change to your chosen style.
+
STYLE
ITALIC
Changes the whole label into italic text (A), as indicated in the
bottom right hand corner of the display.
SYMBOL
Selects from a number of symbol characters. The selected symbol
is inserted into the label at the cursor position.
+
SYMBOL
BARCODE
A menu appears from which you can choose to convert the label
into a barcode label.
PRINT
Prints the label, then cuts the label at the end.
+
PRINT
✂
Feeds out approximately 30mm (1
1
∞) of label tape, then cuts the
tape.
ON/OFF
PRINT
SIZE STYLE
VERT
UL/BOX
BARCODE
MR
LENGTH
CASSETTE
COPIES
SYMBOL
123...n COLOUR
Min
MC
WIDTH
ITALIC
NEW
JUSTIFY
SEARCH
PREVIEW
M
"