Filter
Top Products
7
Creating Wire Wrap Labels
You can create several types of labels that wrap around
a cable or wire: vertical wire wrap, horizontal wire
wrap, self-laminating, and flag labels.
Creating Vertical Wrap Labels
A Vertical Wrap label is placed
around the width of a wire or
cable. You can enter up to five
lines of text and the text is
repeated as many times as
possible depending on the size of the text and the
length of the label.
You select from a number of different wire gauges or
cable lengths. The printer then determines the size of
the label. The following table shows the selections
available.
To create a vertical wrap label
1. Press V.WRAP.
2. Select the desired wire gauge or cable size, and
press OK.
3. Select Done (ESC) to create the label.
To create multiple labels quickly, see Creating a
Series of Labels on page 12.
Creating Horizontal Wrap Labels
A Horizontal Wrap label is
placed horizontally along the
length of the wire or cable. The
label text is repeated as many
times as possible depending on the size of the text and
the width of the tape.
To create a horizontal wrap label
1. Press H.WRAP (SHIFT + V.WRAP).
2. Enter the label length and press OK. Select AUTO to
have the length automatically set to fit the text.
3. Select Done (ESC) to create the label.
To create multiple labels quickly, see Creating a
Series of Labels on page 12.
Creating Self-Laminating Labels
The Self-Laminating label is
designed to be used with RHINO
Self-Laminating Labels (part
number 1734821). The text of the
label is printed on the top portion
of the label so the clear, bottom
half of the label can wrap around and cover the text.
Self-Laminating tape is 24 mm wide; however, you can
only enter two lines of text and are limited to using
extra-extra-small, extra-small, and small font sizes.
To print a self-laminating label
1. Press SELF-LAM (SHIFT + FLAG).
2. Enter the label length or select AUTO to have the
label length automatically set to fit the text.
3. Press OK.
4. Select Done (ESC) to create the label.
To create multiple labels quickly, see Creating a
Series of Labels on page 12.
CAT X CABLE 3.0”
COAX CABLE 4.0”
22-16 AWG CABLE 5.0”
14-10 AWG (Default) CABLE 6.0”
8-4 AWG FIBER 0.1” - 1/4”
3-1 AWG FIBER 1/4” - 1/2”
1/0-4/0 AWG FIBER 1/2” - 1”