Filter
Top Products
ADSL Router User Manaul
40
IP Routing - Static Route
Routing Table shows all static route status and allows you to add new static IP route or delete IP
route. A Static IP Routing is a manually defined path, which determines the data transmitting route.
If your local network is composed of multiple subnets, you may want to specify a routing path to the
routing table.
Destination Network Address:
Display the IP address that the data packets
are to be sent.
Netmask:
Display the subnet mask that the data
transmitting is passing through.
Gateway:
Display the gateway that the data
transmitting is passing through.
WAN Interface:
Display the interface that the data
transmitting is passing through.
Remove:
Allow you to remove the selected static route
settings.
Adding a New One
To add a static route, please choose Static Route - Add. Type the destination network address, subnet
mask and gateway that you get from ISP and click Apply.
Destination Network Address:
The destination IP address of the network
where data packets are to be sent.
Subnet Mask:
Type in the subnet mask that you got from
ISP.
Gateway IP Address:
Check this box to invoke this function. Type
in the gateway that you got from ISP.
WAN Interface:
Check this box to invoke this function and
choose the one from the drop down menu.
Click Apply to view the routing result. This page shows all the routing table of data packets going
through your ADSL Router.
Remove Static Route
If you don’t want the static route that you
created, please click the icon under Delete
from Routing Table.