Eaton Electrical 9140 Power Supply User Manual


 
INSTALLATION
EATON Powerware
®
9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14
19
2. Using two M5 machine screws and an adapter plate, attach the rail
to the front of the rack (see Figure 1 and Figure 2).
Do not tighten the screws.
Front M5 Screws
Position 5
Position 4
Position 6
Position 1
Adapter Plate
Figure 2. Securing the Front Rail
3. Adjust the rail size on the rail assembly for the depth of your rack
(see Figure 3).
Rear
Front
Figure 3. Adjusting t he Rail Depth (Right Rail Assembly Shown)