Filter
Top Products
User Manual
Publication date: January, 2005
Revision A1
47
4. Operation of
Web-based Management
This chapter instructs you how to configure and manage the 16 Gigabit Web
Smart Switch through the web user interface it supports, to access and manage 14
10/100/1000Mbps TP Port and 2 Gigabit TP/SFP Fiber dual media port. The switch
provides 14 fixed Gigabit Ethernet TP ports and 2 optional Gigabit dual media ports
supporting either fiber or TP media. With this facility, you can easily access and
monitor through any one port of the switch all the status of the switch, including
MIBs status, each port activity, multicast traffic, and so on.
The default values of 16 Gigabit Web Smart Switch are listed in the table
below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gatew ay
192.168.1.254
Password
admin
Table 4-1
After the 16 Gigabit Web Smart Switch has been finished configuration, you
can browse it by using the IP address you set up. For instance, type
http://192.168.1.1 in the address row in a browser, it will show the following screen
(see Fig.4-1) and ask you inputting password in order to login and access
authentication. The default password is “admin”. For the first ti me to use, please
enter the default password, then click the <Apply> button. The login process now is
completed.
In the switch, it supports a simple user management function allowing only
one administrator to configure the system at the same time.
To optimize the display effect, we recommend you use Microsoft IE and have
the resolution 1024x768.
Here is the whole function tree with web user interface and we will travel it
through this chapter.