Filter
Top Products
User Manual
Publication date: January, 2005
Revision A1
58
4-2-4. VLAN Group Configuration
Functi on name:
VLAN Group Configuration
Functi on description:
It shows the existed information of VLAN Groups List and maintains them, i.e.
modify and delete one of them. User also can add a new VLAN group by
inputting a new VLAN name and VLAN ID.
If you are in port-based VLAN, it will just show the ID、Description、Member
of the existed port-based VLAN group. If you are in tag-based VLAN, it will
show the ID、Description 、VID、Member of the existed tag-based VLAN
group. The switch cannot store the configuration of port-based VLAN and tag-
based VLAN separately. When you choose one of VLAN mode, the switch will
bring you the responded VLAN configuration which keeps the default data.
You can easily create and delete a VLAN group by pressing <Add Group>
and <Delete Group> function buttons, or click the Group ID directly to edit it.
Parameter description:
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field.
Then, you will enter Tag Base VLAN Group Setting or Port Base VLAN
Group Setting page, which depends on your VLAN mode selection.
Description:
The description defined by administrator is associated with a VLAN
group.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based mode.
Member:
This is used to enable or disable if a port is a member of the new added
VLAN, “Enable” means it is a member of the VLAN. Just tick the check
box (;) beside the port x to enable it.