Filter
Top Products
User Manual
4-2-9. Bandwidth Management
Functi on name:
Bandwidth Management
Functi on description:
Bandwidth Management function is used to set up the limit of Ingress and
Egress bandwidth for each port.
Fig. 4-19
Parameter description:
Port Number:
Choose the port that you would like this function to work on it. Valid
range of the port is 1~16. If you would like to set up all ports at a time,
user is also allowed to choose “All” in the selection list to simplify the
procedure of configuration.
All Traffic for Ingress Rate Limiting:
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. Pause frames are also generated if flow control is enabled.
The limited format of the packet includes unicast, broadcast and
multicast. Valid range is 0~1000.
Broadcast & Multicasat for Ingress Rate Limiting:
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. The limited format of the packet only includes broadcast and
multicast. Valid range is 0~1000.
Publication date: January, 2005
Revision A1
74