Filter
Top Products
16. Repeatedly press Escape to exit the
PCONSOLE program.
17. You must load NetWare print server on the
NetWare file server so that the PrintSir
configured as a remote printer can connect to
that print server and service the print jobs. To
load the NetWare print server, type “LOAD
PSERVER.NLM PrintServer” command at the
system console of the NetWare file server,
where PrintServer is the print server name
newly created by the PCONSOLE program.
To configure the PrintSir as a NetWare remote printer,
perform the following steps:
1. From a workstation, log in to your NetWare
server as SUPERVISOR.
2. Run the PSETUP program included on the CD-
ROM. (ex. e:\dosutil\psetup.exe)
3. Select your new PrintSir from the list provided.
57