Filter
Top Products
The PrintSir stores its internal programs in “flash”
memory, which you can upgrade when new versions of the
PrintSir’s software become available or when you want to
switch between “Standard Feature Set - Type 1” or
“NetWare Enhancement Feature Set – Type 2” -- The
difference between these two feature sets is described at
Chapter 1.6.(Contact your dealer for information about
software upgrades.) To perform an upgrade,
z Make sure the updated PSxxROM.BIN (depending
on your model) file is stored in your computer or
CD-ROM.
z Choose the updated firmware in File Name field.
For example,
<CD Driver>\FLASHROM\<Model Name>\PSxxROM.BIN
z Choose the suitable Feature Set (“Standard Feature
Set - Type 1” or “NetWare Enhancement Feature
Set – Type 2” ) and then click Upgrade button to
upgrade the PrintSir’s flash memory. The yellow
Status LED on the PrintSir should be lit
continuously.
7.12 DHCP Cfg - DHCP Server Configure
87