Eicon Networks 1530 Network Router User Manual


 
Introduction 9
Specifications
Hardware Features
VHSI (Very High Speed Interface) port, supports V.24 and V.35 interfaces
Ethernet 10BaseT RJ45 port
AUX port (DB9 V.24 serial interface) (currently unsupported)
Power jack
Hard Reset button
Indicators lights
Flash memory for convenient firmware upgrade (if available)
VHSI Port (Synchronous)
36-pin high-density D-type connector
Auto-detection of the following interface types:
V.24 (EIA RS232-C)
–V.35
Speeds: 2400 bps to 2048 Kbps, depending on interface
Protocol support: PPP, Frame Relay, X.25, Frame Relay
Indicator Lights
Power status
VHSI port status
AUX port status (currently unused)
Ethernet connector status (located on the connector itself)
Ethernet activity (located on the connector itself)
Protocol support
PPP:
PPP compression (PPP CCP, PPP LZS-STAC, MPPC, Ascend LZS)
Security: PAP, CHAP, MS-CHAP
•X.25:
CCITT/ITU compliance: X.25, X.32, and X.121 (1984)
Up to eight X.25 virtual circuits (includes PVCs and SVCs)
PVC and SVC support with inactivity timeouts
Compression (Eicon Stacker, CISCO, Bay Networks)
•Frame Relay:
IP over Frame Relay (RFC 2427)
Maximum of 8 DLCI
Routing between DLCI
Congestion management (FECN, BENC)
Extended LSN
Automatic LMI detection
Congestion control (FECN & BECN)
Frame Relay compression (FRF.9)