Filter
Top Products
DIVA T/A ISDN Modem User’s Guide
◆
Page 14
Windows 95/98/NT Installation and Setup
Windows 98
Warning!
It is very important to follow the steps, exactly as described below, to install the DIVAT/A
software. The setup file for ISDN modems (mdmisdn.inf), supplied on the Microsoft Windows
98 CD, contains incorrect information about the DIV AT/A ISDN Modem (incorrectly referred
to as ‘Eicon T-A External’). Using this setup file will cause the DIVAT/A to operate incorrectly.
DO NOT use the ‘Add New Hardware’ applet (found in ‘Control Panel’) to install the DIVAT/A.
Setup Instructions
Follow these steps to set up the DIVAT/A under Windows 98.
1
Power on your PC with all cables connected (see page 7
for instructions).
2
Windows 98 detects the DIVAT/A and the ‘New Hardware Found’ window appears,
followed by the ‘Add New Hardware Wizard’ window.
3
Insert the DIVAT/A CD into your computer's CD drive.
4
From the ‘Add New Hardware Wizard’ window, click ‘Next’.
5
Select the ‘Search for the best driver for your device’ option and click ‘Next’.