Filter
Top Products
DIVA T/A ISDN Modem User’s Guide
◆
Page 6
Installation Requirements
To install the DIVAT/A, you will require the following:
Item Description
DIVAT/A Package
•
DIVAT/A ISDN Modem
•
DIVAT/A software (CD)
•
ISDN cable (RJ-45)
•
Serial cable (RS-232)
•
A/C Adapter
•
Phone Adapter (RJ11) (where required)
•
Terminating Resistor (if required - see page 129
)
•
DIVAT/A QuickStart Guide
•
DIVAT/A Release Notes
Desktop or Notebook DIVAT/A can be attached to any desktop or notebook computer.
Remote Access
Client Software
Supplied as part of operating platform or by Internet Service Provider (ISP).
ISDN Basic Rate Line Must be installed by your telephone company.
Terminal Emulation
Program
If you are using an operating system other than Windows 95/98/NT or
Macintosh (System 7 or later), you will need a VT100-compatible
terminal-emulation program (such as Telix or HyperTerminal) in order to
configure the DIVAT/A.
Internet Access
(Optional)
To establish an ISDN connection to the Internet, you will require the
following:
•
ISP that provides ISDN Basic Rate Interface service
•
PPP and TCP/IP communications protocols for accessing your Internet
subscription (e.g. Windows 95/98/NT Dial-Up Networking)
•
TCP/IP clients (Web browser, FTP, Telnet)
Operating System
•
Microsoft® Windows® 95, Windows 98, or Windows NT® (3.51/4.0)
•
Windows 3.x, DOS, or OS/2
•
Macintosh
COM Port IBM-compatible computers:
•
UART 16650 (230.4 kbps) recommended for maximum throughput
•
UART 16550
Macintosh computers
•
Serial port capable of 230.4 kbps transfer recommended (found on most
PowerMacintosh and AV Macintosh computers).