Filter
Top Products
DIVA T/A ISDN Modem User’s Guide
◆
Page 83
Updating Firmware
Updating the DIVA T/A INF file
Procedure for Windows 3.x, Windows for Workgroups 3.11, and Windows NT 3.51
This section only applies if you are using RAS.
To update the DIVA T/A INF file:
1
Open any text editor.
2
Open the file MODEM.INF found in the Windows\System directory for Windows 3.x or
Windows\System32\RAS directory for Windows NT 3.51, and remove all sections relating
to the DIVA T/A ISDN Modem.
3
Open the updated file WFWNTEI2.INF.
4
Copy the contents of WFWNTEI2.INF and append it to the end of the MODEM.INF file;
save the appended MODEM.INF file, and exit your text editor.
5
(Windows NT only). From the RAS setup, remove the ‘Eicon DIVA T/A ISDN Modem’ and
then restore it. Refer to RAS online help for information on removing and adding
modems.