Filter
Top Products
Software Installation 30
This message indicates only that the Diva Server for Windows software does not yet
have Microsoft certification. This does not prevent a correct installation of the software.
Official final releases of Diva Server for Windows Software are Microsoft certified and
this message does not appear.
14. When the copy process is complete, click ‘Finish’ to complete the update.
Note: Depending on your system configuration, you are prompted to restart your
computer. Make sure that the ‘Restart your computer’ option is selected to restart it
after the update is complete.
You can now open the Diva Server Configuration Manager to add components to your
Diva Server for Windows software and configure them.
See Configuration with installed hardware
on page 40.
Changing the configuration:
If you have already updated the drivers and you need to change the configuration:
1. Click ‘Start > Programs > Diva Server for Windows > Diva Server Configuration
Wizard’. The ‘Diva Server Configuration Wizard’ box appears. If you did not set a
password during the update, click ‘Next’. If you set a password, enter it, and then click
‘Next’.
Note: If you change the configuration, existing settings will be overwritten.
2. Proceed as described in step 6
on page 24.