Filter
Top Products
Software Installation 39
Note: If you configure and assign no ISDN numbers at all, neither in the ISDN wizard
nor later on in the Diva Server Configuration Manager, RAS accepts all incoming calls.
Click ‘Next’.
7. If you are using a North American switch type and a Diva Server BRI adapter, the
‘ISDN Phone Number and SPID Information’ box is displayed:
You may enter the phone number and SPID (Service Profile ID) that you want to assign
to RAS here. It is recommended to assign the phone number and SPID in the Diva
Server Configuration Manager because it provides a complete overview of the number
configuration.
Note: If you configure and assign no ISDN numbers at all, neither in the ISDN wizard
nor later on in the Diva Server Configuration Manager, RAS accepts all incoming calls.
Click ‘Next’.
8. In the displayed dialog box, click ‘Finish’ to complete the installation.
9. If prompted, restart your computer.
You can now open the Diva Server Configuration Manager to add components to your
Diva Server for Windows software and configure them.
See Configuration with installed hardware
on page 40.