Filter
Top Products
Software Configuration 41
When you are using a North-American protocol with a Diva Server BRI adapter, you
must always assign ISDN numbers because otherwise incoming calls cannot be
accepted (see ‘Binding Properties’ in the Diva Server Configuration Manager Online
Help (DSMain.chm)).
See below an example of a default installation for a Diva Server BRI-2M 2.0:
3. You can now add components to your Diva Server for Windows software and configure
them as described in ‘Configuring’ in the Diva Server Configuration Manager Online
Help (DSMain.chm).
Creating configuration files
You can create configuration files manually, without having a Diva Server adapter installed.
With the manual configuration the system administrator can create a complete
configuration and save it as a configuration file. This configuration file can be made
available to the users who then only need to install the adapter drivers and to activate the
configuration created by the system administrator. As such, users do not need to configure
the software.
To start an empty configuration:
1. Click ‘Start > Run’.
2. To enter the path to the Diva Server Configuration Manager:
• Insert your Diva Server Software Suite CD-ROM into your CD-ROM drive and enter
the following path:
D:\DRIVER\i386\ENGLISH\Disrvcfg.EXE
(where D: is your CD-ROM drive letter).