Filter
Top Products
27
Computer Input
Press the MENU button to display the On-Screen Menu.
Press the Point
7 8 buttons to move the red frame pointer
to the PC Adjust Menu icon.
1
Move the red frame pointer to
an item and press the SELECT
button.
PC Adjust Menu
PC Adjust Menu icon
Eliminate a flicker from the image displayed. Press the Point 7 8
buttons to adjust the value. (From 0 to 31.)
Adjust the number of total dots in one horizontal period. Press the
Point
7 8 buttons to adjust the number to match your PC image.
Total dots
Press the Point 7 8 buttons to adjust the horizontal picture
position.
Horizontal
Press the Point 7 8 buttons to adjust the vertical picture position.
Vertical
Press the SELECT button to show H-sync freq. and V-sync freq. of
the connected computer.
Current mode
Adjust the clamp level. When the image has dark bars, try this
adjustment.
Clamp
Press the SELECT button at
this icon to adjust other items.
Press the Point 7 8 buttons to
adjust the value.
Status of the
selected Mode
(Stored/Free)
Selected Mode
Press the SELECT button at
the Current mode icon to
show the information of the
connected computer.
Current mode
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5
independent memory areas to store those parameters manually adjusted, which allows you to recall the setting for a
specific computer.
Computer Input
2
Press the Point d button to move the red frame pointer to
the desired item and then press the SELECT button. The
adjustment dialog box will appear. Press the Point
7 8
buttons to adjust the value.
Fine sync