Filter
Top Products
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the image in desirable size.
1. Press MENU BUTTON and MAIN MENU DISPLAY dialog box will appear.
2. Press POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELECT BUTTON. Another dialog box SCREEN ADJUST
DISPLAY will appear.
3. Press POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to the function that you want to adjust.
2. Move the magnifying-glass icon by pressing the POINT UP/DOWN/LEFT/RIGHT
(POINTING PAD) BUTTON(s).
3. To expand the image, press SELECT BUTTON. The image is magnified by degrees (Expand function).
4. To compress the image size, press FRONT CLICK button on the remote control unit. The size of image is reduced by degrees
(Compress function).
5. To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s) and move the magnifying-glass icon.
6. To cancel the Digital Zoom mode, press other buttons (Except NORMAL BUTTON).
7. Press the NORMAL BUTTON in Digital zoom mode, the image size changed to the screen size (1024 x 768).
8. To turn the image size to true size (960 x 768 in SXGA, 1024 x 768 in XGA, 800 x 600 in SVGA and 640 x 480 in VGA), move the
arrow to True by pressing POINT UP/DOWN BUTTON(s) and then press SELECT BUTTON. The image size is turned to the true size.
NOTE: The “True” and “Digital zoom” cannot be operated when “RGB”, “HDTV1O35i” or “HDTVlO8Oi” is selected on the
COMPUTER SYSTEM SELECT menu. (See pages 36- 37).
1. When the image is distorted vertically, move the arrow to Keystone by pressing POINT UP/DOWN BUTTON(s)
and then press SELECT BUTTON. The “Keystone” is displayed to indicate Keystone mode.
2. Press the POINT UP BUTTON to reduce the upper part of the image, and the POINT DOWN BUTTON to reduce
the lower part. (See “KEYSTONE FUNCTION” section on page 28).
3. Press the NORMAL BUTTON in keystone mode, the image changed to original image (not correct keystone
distortion).
• This projector cannot display in the resolution more than 1280 x 1024. If your computer’s screen resolution is
higher than 1280 x 1024, reset the resolution to the lower.
• The image data of VGA (640 x 480), SVGA (800 x 600), or SXGA (1280 x 1024) is modified to fit the screen
size in the initial mode.
• The maximum size in expand mode is 7 times as large as the original screen size. (When original image size is
smaller than the screen size (1024 x 768).
• The minimum size in compress mode is the screen size (1024 x 768) in XGA or SXGA mode, 800 x 600 in SVGA
mode or 640 x 480 in VGA mode.
• Panning function can work only when the image is expanded.
• The normal “Panning Operation” may not function properly if the computer system prepared with the “PC Adjust”
is used.
1. To adjust the image size or pan the image, move the arrow to Digital zoom by pressing
POINT UP/DOWN BUTTON(s) and then press SELECT BUTTON. MAIN MENU
DISPLAY and SCREEN ADJUST DISPLAY will disappeared and “D. Zoom” and the
magnifying-glass icon is displayed.
KEYSTONE
DIGITAL ZOOM