Filter
Top Products
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°.
1. Lift the front of the projector and press the FEET LOCK
LATCHES on both sides of the projector.
2. Release the FEET LOCK LATCHES to lock the ADJUSTABLE
FEET and rotate the ADJUSTABLE FEET to fine tune the
position and the tilt.
3. To shorten the ADJUSTABLE FEET, lift the front of the projector
and press and undo the FEET LOCK LATCHES.
NOTE: The position and the keystone distortion of the image can also
be adjusted using the KEYSTONE function.
(See pages 28, 35 and 45).
Use the carrying handle when moving the projector.
Replace the lens cover and retract the adjustable feet
when moving the projector to prevent damage to the
projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
• Do not drop or bump the projector, otherwise damages or malfunctions may result.
• When transporting the projector, use a
Eiki recommended Carrying Case.
• Do not transport the projector by using a courier or transport service in an unsuitable transport case.
This may cause
damage to the projector. To transport the projector through a courier or transport service, use a
Eiki recommended Case.
• For a carrying or transportation cases, contact a Eiki authorized dealer.