Filter
Top Products
Problem: Try these Solutions
Picture is L/R Reversed.
Check Ceiling/Rear feature.
(See “OTHER FUNCTION SETTING” section on pages 46 - 47).
Picture is T/B inverted.
Check Ceiling feature.
(See “OTHER FUNCTION SETTING” section on pages 46 - 47).
Some displays are not
seen during the
operation.
Check Display feature.
(See “OTHER FUNCTION SETTING” section on pages 46-47).
No sound.
• Check audio cable connection from audio input source.
• Adjust audio source.
• Press the VOLUME (+) button.
• Press the MUTE button.
Remote control unit does
not work.
• Check the batteries.
• Make sure nothing is blocking between the remote control sensor and
remote control unit.
• Make sure you are not too far from the projector when using the remote
control unit. Maximum operate range 16.4(5 m).
• Check the ALL-OFF switch on the Remote Control Unit is set to “ON”.
• Check the transmitted signal mode from the remote control unit.
(See “OTHER FUNCTION SETTING” section on pages 46 - 47).
Wireless mouse function
does not work,.
• Check the cable connection between the projector and the computer.
• Check the mouse setting on your computer.
• Turn on the projector before you turn on the computer.
,