Filter
Top Products
Connectivity Module Stand-Alone Power Managers & Digital Power Meters 5-1
Device Configurator Screen for Power Manager or Digital Power Meter
If a stand-alone Power Manager (PM) or Digital Power Meter (DPM) is used, a button appears on the lower left
corner of the Connectivity Module Device Configurator screen. Press the Config PM button to display the Power
Manager or Power Meter Configuration screen (right side).
Power Manager or Power Meter Configuration
Enter or change the PM or DPM Name (8 char. max.) and Location (18 char. max.) Several configuration settings
must be set appropriately. Press the Update button when finished to save the PM or DPM configuration changes.
Input Name & Output Names (Power Manager only)
For a Power Manager, press the Config I/O Name button to display the Input Name and Output Name screen.
Enter or change the names of the inputs and outputs. Press the Update button when finished to save theses names.
Input names
Input & Output Names (PM only) PM or DPM Configuration
Press Update button when
finished to save the names.
Press Update button when
finished to save the configuration
Press Config I/O Name button to
display Input & Output Names screen.
Press To PM Config button to return to
Power Manager Configuration screen.
Output names
Power
Manager name
Power Manager
location
Power Manager
Power Meter
Power Meter
name
Power Meter
location
NOTE
Update the PM or DPM first
if you
need to update the server. Do not
close the browser during the
updating process. The PM or DPM
update request will be discarded if
the browser is closed.
Press Update button when
finished to save the configuration