Filter
Top Products
IP258
2
CONTENTS
Page
1. PRODUCT INTRODUCTION 5
1.1 The MSM400 slurry monitoring system 5
1.2 Description 5
2. SENSOR TYPES
2.1 Safety Precautions 7
2.2 Hazardous Area systems 7
2.3 Quick Start guide 8
3. CONTROL UNITS 9
3.1 MSM400 Displays and Keypad 9
3.2 Specifications 10
4. INSTALLATION
4.1 Preliminary Checks 11
4.2 Pipe Section Installation 11
4.3 Suspended Sensor Installation 11
4.4 Sensor Cabling 12
4.5 Control Unit 12
4.6 Electrical Connections 13
5. PROGRAMMING
5.1 Programme Structure 16
5.2 Navigation in the Menu System 19
5.3 Diagnostic Parameters 18
5.4 Ex-Factory System Features 18
6. CALIBRATION
6.1 Zero Setting 18
6.2 Re checking Zero 19
6.3 Auto cal zero setting procedures 19
6.4 Auto cal span setting procedure 20
6.5 Auto cal lab values 21
6.6 Maximum % solids 22
6.7 Calibration - Alternative method 22
6.8 Zero setting procedure 22
6.9 Span Calibration Methods 22
6.10 Method 1-Slurry Type 22
6.11 Method 2-Sample Calibration 22
6.12 Method 3-Attenuation Value 23
7.0 PROGRAMMING THE MSM400 FUNCTIONS 24
7.1 Outputs 27
7.2 Current output 27
7,3 Relay Operation 27
7.4 Alarm 28
7.5 Display 28
7.6 Back Light 29
7.7 Engineering 29
7.8 System 29
8. HART SMART COMMUNICATIONS 30
9. MAINTENANCE / INSPECTION 30
APPENDICES
A1. Full Listing of Menu Structure 31-32
A2. Full List of Programme Parameter Functions 33-37
A3. HART and PSION Operating Instructions 38-40
D Handheld Communicator - Assembly Instructions 41-59
Footnote :-
In this manual the following terms are used which refer to trademarks from other manufacturers:
HART: is the protocol adopted for the MSM400 SMART Communications.
HART is a registered trademark of the HART Communications Foundation and is a mnemonic For
Highway Addressable Remote Transducer.
PSION: is the trade mark of PSION plc who manufacture the PSION ORGANISER Hand held computer.
The MOBREY SMART program is stored in a DATAPAK which is also a trademark of PSION plc, and is an accessory
for the Model LZ Organiser