Filter
Top Products
IP258
34
Parameter Description Min. Max. Default
No. value value Ex-Factory
P130 Span 1 @ 1MHz Measured attenuation - - 0.0
P131 Span 1 @ 3.3MHz Measured attenuation - - 0.0
P132 Span 2 @ 1MHz Measured attenuation - - 0.0
P133 Span 2 @ 3.3MHz Measured attenuation - - 0.0
P134 Span 3 @ 1MHz Measured attenuation - - 0.0
P135 Span 3 @ 3.3MHz Measured attenuation - - 0.0
P140 Date for Span 1 - - 0
P141 Date for Span 2 - - 0
P142 Date for Span 3 - - 0
P150 Lab Value 1 - - 0
P151 Lab Value 2 - - 0
P152 Lab Value 3 - - 0
P160 Max % Solids - - -
P200 PV Units
The PV units can be selected from a list
(%, kg/hr, lb/hr,g/l, ppm, None) - - %
P201 Density Units - - %
P240 Description - - -
16 character user-defined description of application, say. MSM400 MONIT
P241 Message - - -
User set up message for HART info 32 Chars
P242 Tag Number - Control Unit - - -
User-defined alpha-numeric entry up to 32 characters in MSM40055
accordance with HART. May be entered by keypad.
P250 Start On
This parameter is used to set up the mode of start
for a desludge operation and is selected from a list
(Time, PV, Ext. Trig) 1 3 none
P251 Stop On
This parameter is used to set up the mode of stop
for a desludge operation and is selected from a list
(Time, PV, Ext. Trig) 1 3 none
P252 Do not Start if
This parameter is used to set up the mode 'do not start if'
for a desludge operation and is selected from a list
(Light sludge, Ext trigger) 1 3 not used
P253 Stop If select from list
This parameter is used to set up the mode 'stop if'
for a desludge operation and is selected from a list
(Light sludge, Ext trigger) 1 3 not used
P254 Start Time #1
The time of day that the first desludge cycle starts 00:00 23:59 7:00
P255 Interval #1
The time interval for the first desludge cycle 00:00 23:59 1:00
P256 Start Time #2
The time of day that the second desludge cycle starts 00:00 23:59 00:00
P257 Interval #2
The time interval for the first desludge cycle 00:00 23:59 00:00
P258 Max retries Not implemented
P300 P Sensor Serial Number - - -
User-settable
P301 P Sensor Type - - -
P302 dB Damping - - -