Filter
Top Products
II) V24/RS232/485 Interface - Single Analyzers and Systems
90003752(1) [AK-Commands] 10/98
AK
2 - 83
AVEZ – Read command "Delay and synchronization time"
To this read command the analyzers in a system or the single analyzer will send to the
TBCC the following data for the called channel (device):
∗ The delay time used for the record of valid signals or used to start the integrators by
"SINT".
∗ The synchronization time used for the output of values from an internal buffer that were
read by "AKON", "AIKO" and "AIKG". This synchronization time is also the delay time
for the output signal of those values.
This procedure will be started with the control command "SRON" and will be finished with
the control command "SROF".
Read command
AVEZ K0
AVEZ Kn
Read of channel n
Code
Response
AVEZ 0 XXX YYY
Time of synchronization
Delay time
Error status
Code