Filter
Top Products
RTM-ATCA-7350 Installation and Use (6806800H30F)
Hardware Preparation and Installation Connecting KVM Cables
34
2.8.1 Connecting KVM Cables
The figure below shows the method of connecting the Keyboard, Video, Mouse (KVM) cables
to RTM-ATCA-7350 when connecting PS/2 compatible keyboard and mouse using a PS/2-USB
converter. USB based keyboard and mouse can also be attached to the RTM by using a USB
hub.
Cable Damage
z There is a back cable trough at the back side of the shelf. You need to arrange and
identify all cables and then bind and fasten them in the back cable through after
connecting them.
z If you use excessive force when installing cables, the cables may be damaged.
z Do not exert too much force when you insert or remove the cables. Do not twist
or tear the cables in any condition.
Product Damage
You have to use matching interfaces for the KVM cables.
Use a PS/2-USB converter when connecting to PS/2 based keyboard and mouse
cables.
Use a USB hub when connecting to USB based keyboard and mouse cables.
Figure 2-7 Connecting the KVM Cables to RTM-ATCA-7350