Filter
Top Products
Mini-MT User Guide
Revision 1.02
Most devices will show the COM port next to the device name. Record this
number. In this example, the Mini-MT device is configured to COM3.
NOTE: Make sure there is no “!” or “X” next to the USB device. If you
see an “!” or an “X,” the device is not properly installed and will not
work.
8.4 Start HyperTerminal
The following configuration steps assume that you are using the Windows XP Operating
System.
Follow these steps:
1. Click Start>Programs>Accessories>Communications>HyperTerminal
You should see the following screen.
2. Enter a name for the connection. In this example, the name is Enfora MiniMT.
3. Click OK.
The next window that will appear is the Connect To window.
GSM2228UG001 Page 28