Filter
Top Products
Mini-MT User Guide
Revision 1.02
9.2.1 GPS Operation from Enfora Demo Server
The same command can be used in the server application by entering AT$GPSRD=10 in
the Command / Data text box, then selecting Write.
The following screen shot shows the command and the response:
NOTE: The third field is a single character field representing the status of
the GPS reading. There are three valid character for this field and are
described below:
• A = OK
• V = Warning
• 9 = Enfora Specific response that GPS solution is not valid and the last known
GPS location is being substituted.
GSM2228UG001 Page 40