EnGenius Technologies ESR-9710 Network Router User Manual


 
ESR-9710 Wireless N Gigabit Router Version 1.0
24
Select the PIN radio button and then click on the Next button.
Specify the PIN and then click on the Connect button.
The wireless device configuration is now complete.
4.2.2 Using the Push Button
WPS is used for WiFi Protected Setup. By pressing the WPS button on the front
panel of the device, the security settings of the device will automatically synchronize
with other wireless devices on your network that support Wi-Fi Protected Setup
If the device supports Wi-Fi Protected Setup and has a configuration button, you can
add it to the network by pressing the configuration button on the device and then the
on the router within 60 seconds. The status LED on the router will flash three times if
the device has been successfully added to the network.
Select the Push Button radio button and then click on the Next button.
Press the WPS button on the device (which is located on the left side of the front
panel) and then click on the Next button.