Support User Manuals

Enterasys Networks 2G4082-25 Network Router User Manual

Open as PDF

of 58

Network Expansion Module (NEM) Option

1-4 Introduction

Network Expansion Module (NEM) Option

The2G4082‐25optionslotprovidesaccesstoaninstallednetworkexpansionmodule.Refertothe

EnterasysNetworkswebsiteforacurrentlistingoftheavailableNEMs.Specificinstallation

instructionsareshippedwitheachNEM.

Connectivity

Dependingonhowthe2G4082‐25isconfigured,itcansupportupto:

• 24,10BASE‐T/100BASE‐TX/1000BASE‐Tswitchedportsconnectedthrough24,fixedRJ45

frontpanelconnectors,or

• 24,10BASE‐T/100BASE‐TX/1000BASE‐Tswitchedportsplusanoptionalnetworkexpansion

module.

Management

Managementofthemodulecanbeeitherin‐bandorout‐of‐band.In‐bandremotemanagementis

possibleusingTelnet,EnterasysNetworks’NetSight

®

managementapplication,orWebView™

application.Out‐of‐bandmanagementisprovidedthroughtheRJ45COM(Communication)port

onthefrontpanelusingaVT100terminaloraVT100terminalemulator.

Switch Configuration Using WebView

EnterasysNetworks’HTTP‐basedWebmanagementapplicati on(WebView)isanintuitiveweb

toolforsimplemanagementtasks.

Switch Configuration Using CLI Commands

TheCLIcommandsenableyoutoperformmorecompleteswitchconfigurationmanagement

tasks.

ForCLIcommandsetinformationandhowtoconfigurethemodule,refertotheEnterasysMatrix

DFE‐Diamond/PlatinumSeriesConfigurationGuide.

previous next