Support User Manuals

Enterasys Networks 2G4082-25 Network Router User Manual

Open as PDF

of 58

Matrix DFE-Platinum Series Hardware Installation Guide B-1

B

Mode Switch Bank Settings

and Optional Installations

Thisappendixcoversthefollowingitems:

Required Tools

Usethefollowingtoolstoperformtheproceduresprovidedinthisappendix:

•Antistaticwriststrap

• Phillipsscrewdri ver

Setting the Mode Switches

Figure B‐1showsthelocationofthemodeswitchesandtheswitchsettingsfornormaloperation.

Theseswitchesaresetatthefactorytothe offpositionandrarelyneedtobechanged.

Switchdefinitionsandpositionsareasfollows:

•Switches1through6–ForEnterasysNetworksuseonly.

•Switch7

–ClearPersistentData.ChangingthepositionofthisswitchclearsPersistentDataon

thenextpower‐upofthemodule.Alluser‐enteredparameters,suchastheIPaddressor

modulenames,areresettothefactorydefaultsettings.Oncethemoduleresets,youcaneither

usethefactorydefault

settingsorreenteryourownparameters.

For information about... Refer to page...

Required Tools B-1

Setting the Mode Switches B-1

Memory Locations and Replacement Procedures B-2

Caution: An antistatic wrist strap is required to perform the following procedures to minimize ESD

damage to the devices involved.

Precaución: Para minimizar los efectos de las descargas de electricidad estática, deberá utilizar

una pulsera antiestática al realizar los siguiente procedimientos.

Caution: Read the appropriate sections to be fully aware of the consequences when changing

switch settings.

Only qualified personnel should change switch settings.

Precaución: Si desea modificar la configuración del interruptor, lea las secciones

correspondientes para saber cuál será el resultado de hacerlo.

Estas modificaciones a la configuración sólo debe realizarlas personal calificado.

previous next