Enterasys Networks 7S4280-19-SYS Computer Hardware User Manual


 
NAC Controller PEP 7S4280-19 Specifications
A-10 Specifications and Regulatory Compliance
MGBIC-02 Specifications (1000BASE-T)
Regulatory Compliance
The2S408225and7S428019meetthesafetyandelectromagneticcompatibility(EMC)
requirementslistedinTable A21:
Table A-20 MGBIC-02 / Specifications
Item Specification
Supported Cable
Type:
Maximum Length
Copper, Category 5 UTP
Up to 100 meters
Connector RJ45
Data Rate 1 Gbps, IEEE 802.3:2000 compatible
1000BASE-T operation only
Automatic crossover detection
TX Output impedance 100 ohms, typical at all frequencies between 1 MHz and 125 MHz
RX Input impedance 100 ohms, typical at all frequencies between 1 MHz and 125 Hz
Table A-21 Compliance Standards
Regulatory Compliance Standards
Safety UL 60950, CSA C22.2 No. 60950, 2006/95/EC, EN 60950, IEC
60950, EN 60825, 21 CFR 1040.10.
Electromagnetic Compatibility (EMC) 47 CFR Parts 2 and 15, CSA C108.8, 2004/108/EC, EN 55022, EN
61000-3-2, EN 61000-3-3, EN 55024, AS/NZS CISPR 22, VCCI
V-3.