Filter
Top Products
SecureStack A2 Installation Guide 3-1
3
Hardware Installation
ThischapterprovidesinstructionsonhowtoinstalltheA2H123‐24.Followtheorderof
thesectionslistedbelowtocorrectlyinstalltheswitch.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
For information about... Refer to page...
Considerations Prior to Installation 3-2
Required Tools 3-2
Unpacking the Switch 3-2
Installing the Switch on a Flat Surface 3-3
Rack Mounting the Switch 3-6
Connecting Stacking Cables 3-7
Configuring Switches in a Stack 3-9
Connecting AC and RPS-SYS Power 3-12
Connecting to Console Port for Local Management 3-15
Connecting to the Network 3-19
Completing the Installation 3-25