Support User Manuals

Enterasys Networks A2H123-24 Switch User Manual

Open as PDF

of 64

Using the Reset Switch

4-8 Troubleshooting

Using the Reset Switch

IfyouforgettheSecureStackA2loginpassword,usetheResetswitchasdescribedinthe

followingprocedure.

Figure 4-2 Reset Switch

ToresettheSecureStackA2password,refertoFigure 4‐2andproceedasfollows:

1. Press‐and‐holdtheResetswitchwhiletheswitchisoperational.Thischangeofthe

loginpasswordtothe

defaultpasswordwillbeindicatedviaCLIonly.

2. Logontoswitchmanagement.YoucannowlogontotheswitchviatheConsoleport

andassignanewpasswordusingthecommandlineinterface(CLI).

3. ToaccessswitchmanagementfromyourlocalPC,terminal,ormodemconnection,

refertotheSecureStackA2

ConfigurationGuideforinstructionsonhowtologinand

enteranewpassword.Theguideisavailableonlineat:

http://www.enterasys.com/support/manuals

Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribed

in“GettingHelp”onpage xviii.

1 Reset switch

Note: Notify the system manager before changing the password.

Console

CPU

RPS

MGR

À

previous next