Support User Manuals

Enterasys Networks B2G124-24 Switch User Manual

Open as PDF

of 80

Connecting AC and RPS-SYS Power

SecureStack B2 Installation Guide 3-17

C2RPS-SYS Redundant Power System

Ifyouareinstallinganoptionalredundantpowersystem(C2RPS‐SYS),refertothe

installationinstructionssuppliedwiththeSecureStackRPS.Theswitchisconnectedtoa

C2RPS‐PSMusingaC2RPS‐PSMCable.

Ifyouareinstallingtheswitchasastandaloneswitch,proceedto“ConnectingtoConsole

Portfor

LocalManagement”onpage 3‐18.Ifyouareinstallingswitchesinastack

configuration,applypowertoeachswitchinorder,accordingtotheprocedureyouusein

“ConfiguringSwitchesinaStack”onpage 3‐12.

Stack Initialization Overview

Whenyouinstallandconnectallthehigh‐speedstackingcablestotheswitchesinthe

stackbeforeapplyingpowertotheswitches,thefollowingoccurs:

•Theswitchthatwillmanage(Manager)thestackisautomaticallyestablishedwithall

otherswitchesestablishedasMemberswitchesinthestack.Whenthesw i tches

completetheirinitializations,oneoftheswitchesinthestackwillilluminateits

ManagerLED,indicatingthatitisthestackManager.TheManagerLEDoneach

Memberswitchwillbeoff.

•ThehierarchyoftheswitchesthatwillfunctionasbackupManagerisalsodetermined

incasethecurrentManager

malfunctions,ispowereddown,orisdisconnectedfrom

thestack.

•TheConsoleportoneachMemberswitchisdeactivated.OnlytheConsoleportonthe

Managerswitchisactiveforout‐ofbandconfigurationtosettheIPaddress,

password,andotherconfigurationsettings.

OnceyouknowwhichswitchistheManager,

proceedto“ConnectingtoConsolePortfor

LocalManagement”onpage 3‐18.

Caution: To prevent damaging the switch, DO NOTconnect a Power over

Ethernet-compliant Redundant Power System (C2RPS-POE) to the redundant power

supply connector. The switch is only compatible with the SecureStack C2RPS-SYS

redundant power supply system.

Precaución: No conecte una fuente de poder redundante (RPS) SecureStack C2 PoE

(C2RPS-POE) al cable de corriente. De lo contrario, el dispositivo puede dañarse.

previous next