Enterasys Networks RBT-1002C Network Router User Manual


 
C
OMPLIANCES
XI
described in this document.
This device employs a radar detection feature required for operation in the 5 GHz band.
This feature is automatically enabled when the country of operation is correctly
configured for any of the countries listed below. The presence of nearby radar operation
may result in temporary interruption of operation of this device. The radar detection
feature will automatically restart operation on a channel free of radar.
The 5 GHz Turbo Mode feature is not allowed for operation in any of the countries. The
current setting for this feature is found in the 5 GHz 802.11a Radio Settings Window as
described in the user guide.
The 5 GHz radio's Auto Channel Select setting described in the user guide must always
remain enabled to ensure that automatic 5 GHz channel selection complies with
requirements. The current setting for this feature is found in the 5 GHz 802.11a Radio
Settings Window as described in the user guide.
This device is restricted to indoor use when operated using the 5.15 - 5.35 GHz band:
Channels 36, 40, 44, 48, 52, 56, 60, 64.
Operation Using 5 GHz Channels in the Asia, Pacific, and Middle East
Community
The user/installer must use the provided configuration utility to check the current
channel of operation and make necessary configuration changes to ensure
operation occurs in conformance with the spectrum usage laws as described below
and elsewhere in this document.
Asia, Pacific, and Middle East usage of 5GHz Channels
Country Allowed Frequency Band Allowed Channel Numbers Usage
Singapore 5.15 - 5.35 GHz 36 - 64 Indoors only
Israel 5.15 - 5.35 GHz 36 - 64 Indoors/Outdoors
Korea 5.15 - 5.35
5.725 - 5.825
36 - 64
149- 161
Indoors only
Indoors/Outdoors