Filter
Top Products
2-1
Chapter 2
Hardware Installation
1. Select a Site – Choose a proper place for the access point.
In general, the best location is at the center of your wireless
coverage area, within line of sight of all wireless devices. Try
to place the access point in a position that can best cover its
Basic Service Set. For optimum performance, consider these
points:
• Mount the access point as high as possible above any
obstructions in the coverage area.
• Avoid mounting next to or near building support columns
or other obstructions that may cause reduced signal or
null zones in parts of the coverage area.
• Mount away from any signal absorbing or reflecting
structures (such as those containing metal)
Note: The supplied bezel should not be used when mounting on a
plenum ceiling.
2. Mount the Access Point – The access point can be
mounted on any horizontal surface or a wall.
Mounting on a flat surface, other than a wall or the ceiling– To
keep the access point from sliding on the surface, attach the
four rubber feet provided in the accessory kit to the marked
circles on the bottom of the access point.