2
INSTALLING THE ETHERNET
ADAPTER
This chapter contains the information you need to install and set up the
Ethernet Adapter. It covers the following topics:
■ Unpacking the Ethernet Adapter
■ Observing Safety Precautions
■ Deciding Where to Place the Ethernet Adapter
■ Connecting the Ethernet Adapter
■ Checking the LED Indicators
■ Attaching An External Antenna
■ Determining if you Need to Configure the Ethernet Adapter
■ Using the Enterasys Networks Installation CD
Unpacking the
Ethernet Adapter
Make sure that you have the following items, which are included with the
Ethernet Adapter:
■ Power adapter and power cord.
■ Standard Category 5 unshielded twisted pair (UTP) Ethernet cable.
■ Rubber feet (four; used for a flat-surface installation).
■ Enterasys Networks Installation CD.
For wall-mounting installations, you need the following items, which
are not included with the Ethernet Adapter:
■ Mounting screws.
■ Plastic anchors (for drywall mounting).