Filter
Top Products
Using the Configuration Management System 47
Using TFTP
The general instructions for installing the upgrade using TFTP are:
1 Launch the Configuration Management System.
2 Under Tools, click Upgrade System.
3 Select TFTP.
4 Enter the file name for the firmware.
5 Enter the IP address of the TFTP server where the upgrade files are located.
6 Click Upgrade.
Using HTTP
The general instructions for installing the upgrade using HTTP are:
1 Launch the Configuration Management System.
2 Under Tools, click Upgrade System.
3 Select HTTP.
4 Click Browse to locate the downloaded firmware file.
5 Click Upgrade to start the upgrade process.
The upgrade takes place through the HTTP protocol from the local
computer.
Changing the
Administration Login
Name and Password
Enterasys Networks recommends that you set a password to protect
against unauthorized access. After you set the password, you must enter
it each time you launch the configuration for the device.
Under Tools, click Change Administration Password. The Change
Administration Password page appears, where you can change the login
name and administration password for the device. Enter the current
password and new password in the spaces provided and click Save.