Filter
Top Products
29
3-4 POWER MANAGEMENT SETUP
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP
UTILITY to display the following screen. This menu allows the user to modify
the power management parameters and IRQ signals. In general, these parameters
should not be changed unless it's absolutely necessary.
Figure 3-5 POWER MANAGEMENT SETUP
Again, user can move the cursor by pressing direction keys to the field needed to
be modified and press <PgDn> or <PgUp> to alter item selection. You can only
change the content of Doze Mode, Standby Mode, and Suspend Mode when the
Power Management is set to 'User Define'.
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define ** Power Down & Resume Events **
PM Control by APM : Yes IRQ3 (COM 2) : ON
Video off Method : V/H SYNC+Blank IRQ4 (COM 1) : ON
Modem Use IRQ : 3 IRQ5 (LPT 2) : ON
IRQ6 (Floppy Disk) : ON
Doze Mode : Disable IRQ7 (LPT 1) : OFF
Standby Mode : Disable IRQ8 (RTC Alarm) : OFF
Suspend Mode : Disable IRQ9 (IRQ2 Redir) : ON
HDD Power Down : 15min IRQ10 (Reserved) : ON
IRQ11 (Reserved) : ON
** Wake Up Events In Doze & Standby ** IRQ12 (PS/2 Mouse) : ON
IRQ3 (Wake-Up Event) : ON IRQ13 (Coprocessor) : ON
IRQ4 (Wake-Up Event) : ON IRQ14 (Hard Disk) : ON
IRQ8 (Wake-Up Event) : ON IRQ15 (Reserved0 : OFF
IRQ12 (Wake-Up Event) : ON
Esc : Quit : Select Item
F7 : Load Setup Defaults
F5 : Old Values (Shift)F2 : Color
F1 : Help PU/PD/+/- : Modify
Award BIOS SETUP 3-10
3-3-1 The Description of the Power Management (PM)
A. Power Management mode selection:
Disabled: The system operates in NORMAL conditions (Non-
GREEN), and the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in
each mode.
Min. saving: Minimum power savings. Inactivity period is 1 minute in
each mode.
User define: Allow user to define PM Timers parameters to control
power saving mode.