EPoX Computer KP6-FX2 Computer Hardware User Manual


 
3
User Notice
No part of this product, including the product and software may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means with the express written permission of EPoX
Computer Company (hereinafter referred to as EPoX) except documentation kept
by the purchaser for backup purposes.
EPoX provedes this manual as is” without warranty of any kind, either express or
implied, including but not limited to the implied warranties or conditions of
merchantability or fitness for a particular purpose. In no event shall EPoX be
liable for any loss or profits, loss of business, loss of use or data, interruption of
business or for indirect, special incidental, or consequential damages of any kind,
even if EPoX has been advised of the possibility of such damages arising from
any defect or error in the manual or product. EPoX may review this manual from
time to time without notice. For updated BIOS, drivers, or products release
information you may visit EPoXs home page at: http://www.epox.com
Products mentioned in this manual are mentioned for identification purposes only.
Product names appearing in this manual may or may not be registered trademarks
of copyrights of their respective companies.
The product name and revision number are both printed on the mainboard itself.
© Copyright 1997 EPoX Computer Company. All right reserved.
Handling Procedures
Static electricity can severely damage your equipment. Handle the KP6-FX 2
and any other device in your system with care and avoid contact with components
on the card.
Always work on an antistatic surface to avoid possible damage to the card from
static discharge. The packing material placed on a table top makes a good
antistatic work surface.
We assume no responsibility for any damage to the KP6-FX 2 mainboard that
results from failure to follow installation instructions or failure to observe safety
precautions.
CAUTION
The KP6-FX 2 mainboard is subject to
damage by static electricity. Always
observe the handling procedures.