Filter
Top Products
IntroductionKP6-LA
Page 1-7
I/O Shield Connector
The KP6-LA is equipped with an I/O back panel. Please use the appropriate I/O
shield (figure 3).
ATX
POWER SUPPLY
KP6-LA Board
Power-On/Off (Remote)
The KP6-LA has a single 20-pin connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be connected to
the systems front panel for system Power On/Off button. The systems power On/Off
button should be a momentary button that is normally open.
The KP6-LA has been designed with “Soft Off" functions. You can turn Off the
system from one of two sources: The first is the front panel Power On/Off button,
and the other is the "Soft Off" function (coming from the KP6-LA’s onboard circuit
controller) that can be controlled by the operating system. Windows 95 will control
this when the user clicks that they are ready to Shutdown the system.
JP 7
Figure 3:
KP6-LA
I/O back
panel layout
Case (chassis) Power
ON/OFF button (JP7)
PS/2 Mouse
PS/2 Keyboard
Parallel Port
COM1
USB
COM2
Figure 4: Simple ATX Power
ON/OFF Controller