Filter
Top Products
InstallationKP6-LA
Page 3-3
Easy Installation Procedure
Easy Installation Procedure
The following must be completed before powering on your new system:
3-1. Configure Jumpers to match your hardware
3-2. Install memory chips
3-3. Install Pentium II Processor
3-4. Device Connectors
Section 3-1
Configure Jumpers
EPoX designs all motherboards with the fewest jumpers to make your install fast and
easy.
The following will describe all of the jumpers that you are required to set before
moving on to step 3-2.
Note: The jumpers as depicted as shown (Figure 1) in their correct physical
orientation.
CMOS Clear
JP5: = 1-2 - Run Mode (Default)
= 2-3 - Clear CMOS
JP5:
1
BIOS Voltage Setting
JP2, JP3: = 1-2 - +5V Flash (Default)
= 2-3 - +12V Flash
1
1
JP2:
JP3: