Filter
Top Products
PowerLite S5 Series / 77c Projector
14 - PowerLite S5 Series / 77c Projector 3/08
7. Gently insert the new lamp along the guide rail. If it doesn’t
fit easily, make sure it’s facing the correct way. Push the
lamp down firmly where the label
PUSH appears.
Caution:
Do not touch the glass portion of the lamp assembly. Touching
the glass could result in premature lamp failure.
8. Once the lamp is fully inserted, tighten its screws.
9. Lower the lamp cover into place. (The opening should be
almost covered, and the top of the cover should be flush
with the top of the projector.) Then slide the cover closed
and tighten the screw.
Note:
Be sure to seat the lamp fully and secure the lamp cover. If the
lamp is not properly installed or the cover is loose, the lamp will
not turn on.
10. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear
the
Replace the Lamp warning message. Follow the steps
below.
Note:
Do not reset the lamp timer if you have not replaced the lamp. If
you do, the Lamp Hours will not accurately reflect the number of
hours that the lamp has been used.
1. Connect the power cable and turn on the projector.
2. Press the
Menu button on the remote control or projector
and select the
Reset menu. Then press Enter. You see the
following:
3. Select
Reset Lamp Hours and press Enter. You see a
confirmation screen.
4. Select
Yes and press Enter.
5. Press
Esc to return to the main menu or the Menu button
to exit the menu system.
Transporting the Projector
The projector contains many glass and precision parts. If you
need to transport it, please follow these packing guidelines to
prevent damage to the projector:
❏ When shipping the projector for repairs, use the original
packaging material if possible. If you do not have the
original packaging, use equivalent materials, placing plenty
of cushioning around the projector.
❏ When transporting the projector as freight or checked
luggage, first put it in the supplied carrying case, then pack
it in a firm box, using cushioning around the case.
❏ When you are hand-carrying the projector, be sure to use
the supplied carrying case.
Note:
Epson shall not be liable for any damages incurred during
transportation.