Filter
Top Products
Epson PowerLite Pro Cinema 800
10 - Epson PowerLite Pro Cinema 800 11/05
5. Loosen the two screws securing the lamp (they don’t come
all the way out).
6. Grasp the lamp as shown and pull it straight out.
Warning
: The lamp(s) in this product contain mercury.
Please consult your state and local regulations regarding
disposal or recycling. Do not put in the trash.
7. Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp assembly.
Touching the glass could result in premature lamp failure.
8. Replace the cover. (The projector won’t work if the lamp
cover is open or loose.)
9. Reset the lamp usage timer, as described in the next section.
Resetting the Lamp Timer
After installing a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used.
1. Press the
Menu button on the projector or remote control.
2. Use the menu navigation buttons to open the
Reset menu,
then select
Reset Lamp Hours.
3. When you see a confirmation prompt, highlight
Yes and
press the
Select button.
4. When you’re finished, press the
Menu button to exit.
The lamp usage timer doesn’t register until you’ve used the
lamp for at least 10 hours.
Optional Accessories
Epson provides the following optional accessories:
You can purchase accessories from an authorized Epson
reseller. To find the nearest reseller, call 800-GO-EPSON
(800-463-7766).
In the U.S., you can also purchase online at
www.epsonstore.com.
In Canada, you can also purchase at www.epson.ca or
(800) 807-7766.
Related Documentation
CPD-20687 EPSON PowerLite Pro Cinema 800
User’s Guide
CPD- 20729 EPSON Extra Care Three-year Home
Service warranty
Note: Setup instructions are provided in the User’s Guide. There is
no setup sheet.
Product Part number
Replacement lamp (ELPLP35) V13H010L35
Air filter replacement (ELPAF09) V13H134A09
Kensington security lock ELPSL01
S-video cable ELPSV01
Component video cable ELPKC19
SM