Filter
Top Products
Epson PowerLite Pro Cinema 800
11/05 Epson PowerLite Pro Cinema 800 - 3
If you place the projector above or below screen level, you’ll
have to tilt it up or down to aim the image at the screen; this
distorts (or “keystones”) the shape of the image, but you can
correct it using the projector’s Keystone function (see page 6).
If you place the projector off to the side, aim it straight ahead
(rather than at the center of the screen), then use the horizontal
lens shift dial to center the image. Do not place the projector
farther to the left or right than the edge of the screen, or you
will not be able to project a square (or rectangular) image.
Caution: To adjust the lens position, make sure you use the lens
shift dials. Do not try to move the lens manually, or you may strip
the gears.
Tip: You can display a test pattern to help you center the image on
the screen. Press the
Pattern button on the remote control, then
select
Display Position. You can use the feet to correct the angle of
the image if it’s tilted.
Installing the Projector
The illustrations below and in the next column show the
dimensions of the projector:
The included projector mount lets you attach the projector to
the wall or ceiling in the location that works best for your room.
Follow the instructions included with the mount to install the
projector, which weighs 11.5 pounds. The wall or ceiling
where you install it must be capable of supporting a weight of
58 pounds.
If you are planning to use an AV controller with the projector,
refer to the table of ESC/VP21 command codes below.
ESC/VP21 Command Codes
You can use an AV controller with a 9-pin null modem serial
cable to control the projector. You can download the complete
ESC/VP 21 Communication Manual for home theater projectors
from the Epson website at http://support.epson.com. Following
are some of the available codes:
Vertical lens shift dial
Horizontal lens shift dial
4.33 in.
15.98 in.
5.18 in.
0.45 in.
5.63 in.
2.32 in.
0.75 in.
Item Command
Power ON/OFF ON PWR ON
OFF PWR OFF
A/V Mute ON/OFF ON MUTE ON
OFF MUTE OFF
A/V Mute selection Black MSEL 00
Blue MSEL 01
User’s Logo MSEL 02
11.81 in.
2.08 in.
6.3 in.
12.17 in.
3 in.