20
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
ON
OFF
MAGNIFY
HOME PAGE UP VOLUME
END
PAGE DOWN
MUTE
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
ON
OFF
MAGNIFY
HOME PAGE UP VOLUME
END
PAGE DOWN
MUTE
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
Operating
►
Do not lengthen the elevator feet to 43 mm or more. The foot
lengthened exceeding the limit may come off from the projector, and result in an injury.
►Tilt the projector with these elevating feet only.
►Do not tilt the projector over 5 degrees, when it is suspended from a ceiling or
somewhere.
CAUTION
COMPUTER OUT
COMPUTER IN2
COMPUTER IN1
CONTROL
LAN
AUDIO
OUT
S-VIDEO
Y C
B
/P
B
C
R
/P
R
VIDEO L
R
USB
AUDIO IN3
AUDIO IN
1
2
Adjusting the projection position
This projector has four elevator feet in the bottom. Use them to adjust the
projection position.
Elevator feet
max. 43 mm
Adjusting the zoom
Press the D-ZOOM + or D-ZOOM – button on the remote
control to display D-ZOOM dialog on screen.
Use the D-ZOOM + and D-ZOOM – buttons to adjust the
picture size.
To nish the operation, do not touch these buttons for a few
seconds until the dialog is disappeared.
D-ZOOM + button
D-ZOOM – button
Adjusting the picture position
Press the POSITION button on the remote control while no
menu is on screen, to display the D-SHIFT dialog on screen.
Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
Press the POSITION button again to nish this operation.
POSITION button
● If you want to expand a part of the image, use the magnify
function (22).
● This is a function to shift the position of the shrunken picture
by the zoom function.
● The function is not available, if any menu is displayed on
screen.
● The function is not available, if the D-ZOOM is adjusted to
100 (full screen) on its dialog.