Filter
Top Products
36
SETUP Menu
SETUP Menu
From the SETUP Menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or the ENTER button to execute the
item. Then perform it according to the following table.
Item Description
D-ZOOM
Using the ▲/▼ buttons adjusts the zoom.
Large
ó
Small
D-SHIFT V
Using the ▲/▼ buttons adjusts the vertical picture position.
Up
ó
Down
• The function is not available, if the D-ZOOM is adjusted to 100 (full
screen) on its dialog.
D-SHIFT H
Using the ▲/▼ buttons adjusts the horizontal picture position.
Right
ó
Left
• The function is not available, if the D-ZOOM is adjusted to 100 (full
screen) on its dialog.
KEYSTONE
Using the ▲/▼ buttons corrects the vertical keystone distortion.
Shrink the top of the image ó Shrink the bottom of the image
• The adjustable range of this function will vary with the type of input
signal. For some input, this function may not work well.
• This function will be unavailable when the Transition Detector is
on (51).
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When WHISPER is selected, acoustic noise and screen brightness
are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (51) will be displayed when
projector is restarted after the power switch is turned off.
VOLUME
Using the ▲/▼ buttons adjusts the volume.
High ó Low
(continued on next page)