Filter
Top Products
21
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
ON
OFF
MAGNIFY
HOME PAGE UP VOLUME
END
PAGE DOWN
MUTE
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
ON
OFF
MAGNIFY
HOME PAGE UP VOLUME
END
PAGE DOWN
MUTE
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
Operating
1.
Press AUTO button on the remote control.
Pressing this button performs the following.
Using the automatic adjustment feature
For a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture
may still be incorrectly adjusted. Use a bright picture when
adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT Menu (34). The vertical position
and horizontal position will be automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input. When this
function is performed for a video signal, a certain extra such as a line may
appear outside a picture.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION
Menu (45).
AUTO button
For a component video signal
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
Adjusting the focus
Press the FOCUS + or FOCUS – button on the remote control,
or FOCUS + or FOCUS – button on the projector while no
menu is on screen, to display the FOCUS box on screen.
Use the FOCUS + and FOCUS – buttons to adjust the screen
focus. After the focus adjustment, wait for a while until the
FOCUS box is disappeared, if you want to display any other
menu on screen by pushing the MENU button on the projector.
FOCUS + button
FOCUS – button