Filter
Top Products
32 Projecting
To focus and adjust the image, see page 35. If a projected image fails
to appear, see “What To Do If You See a Blank Screen” on page 33.
When you’re done with your presentation, shut down the projector as
described on page 41. Shutting down the projector correctly prevents
premature lamp failure and possible damage from overheating.
Selecting the Image Source
Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer and DVD player). If you don’t see the image you want,
press one of the following buttons on the remote control:
■ Comp 1
Press this button to move through the following options:
Computer 1 (Auto), Computer 1 (RGB), and Computer 1
(Component Video)
.
■ Comp 2
Press this button to move through the following options:
Computer 2 (Auto), Computer 2 (RGB), Computer 2
(Component Video)
.
■ S-Video
Press to select S-Video.
■ Video
Press to select Video.
You can also press the
Source Search button on the remote control
or projector until the correct device image is projected. If a projected
image fails to appear, see the next section for help.
Once you see your image, turn to page 35 for instructions on focusing
and making other image adjustments.
note
The name of the selected
image source appears in the
upper right corner of the
screen.