Filter
Top Products
Projecting 39
You can also make keystone adjustments using the projector’s Setting
menu. See page 58.
Adjusting the Brightness
The brightness of an image depends on the source you are projecting
and the amount of light in the room. If the image is too bright or not
bright enough, here are two ways you can adjust it:
■ Change the Brightness setting in the Image menu. See page 54.
■ Select Low or High for the Brightness Control option in the
Setting menu. (See page 58.) Low brightness mode extends the
life of the lamp and decreases the fan noise.
Correcting Computer Images
If you’ve connected a computer and the image doesn’t look right, or it
doesn’t fit properly on the screen, press the
Auto button on the
remote control. This automatically resets the projector’s tracking,
sync, resolution, and position settings. You must be projecting an
image for this button to have any effect. Additionally, if the
Auto
Setup
option in the Signal menu is set to OFF, the Auto function will
not work. See page 56.
Adjusting the Color Mode
You may want to adjust the color mode to select a different setting
that is appropriate for the image you’re projecting and the
environment in which you’re projecting it.
If you’re projecting computer or RGB video images, the default color
mode is
Presentation, which is appropriate for presentations in
bright rooms. For other images, the default color mode is
Dynamic,
which optimizes video images using natural colors.
Color Mode button
Auto button